SOTI Pulse Logo

TC58 Datawedge api RESTORE_CONFIG

MH
Mark Henshaw
purolatorproduction

I have been through all the documentation on the SOTI and Zebra sites and have tried all combinations of sendintents and i cannot get the datawedge profile to reset. Has anyone got this to work on a TC58 on the latest LG?

sendintent -b "intent:#Intent;action=com.symbol.datawedge.api.ACTION;S.putExtra=RESTORE_CONFIG;end"

sendintent -b "intent:#Intent;action=com.symbol.datawedge.api.ACTION;S.putExtra=com.symbol.datawedge.api.RESTORE_CONFIG;end"

sendintent -b "intent:#Intent;action=com.symbol.datawedge.api.ACTION.RESTORE_CONFIG;end"

2 years ago
Android Scripting
ANSWERS
ZC
Zafer Cigdem
2 years ago

Hi Mark,

This is not a direct answer about the intent but that would be an alternative one for your need. If you want to reset the profile configuration of the datawedge, as far as I know, you can use one reference device as a benchmark, and you can set the datawedge configuration of this device manually however the settings you want. And then you can export the data wedge configuration from this device that can be used on other devices, remotely. 

You can use Stagenow to use the reference device's DB and get the xml file at the end, and you can push out this .xml file to other devices via Mobicontrol such as File-Sync to set their datawedge configuration as same as your reference device. If you want to try this, open Stagenow select Xpert mode and then "DataWedgeMgr"... You can find some similar post below or other posts on SOTI Pulse:

SOTI Discussion Forum

Please test it on single device and then verify first. I hope it helps. Thank you

Zafer

M
MPMOD@SOTI
2 years ago

Hi Mark,

Thank you for posting on SOTI Pulse! 

I would recommend speaking with Zebra support on this issue as well. Please let me know if Zafer's post has helped in any way.

Kind regards,

Technical Support Specialist | SOTI | +1 905.624.9828 | SOTI.net lDiscussion Forum | Log a Case Online l Facebook l LinkedIn l Twitter 

Similar Discussions