No Matches Found!
Try with a different search term
No Matches Found!
Try with a different search term
There's a new home for Articles. Find Articles on Our Product Support Page.
Hello, Is it possible to Remote Control a moto g(8) play device?
I am trying to enroll a Motorola One Device, when I do a factory reset, it will not give me the Option to enter the Enrollment Command AFW#MOBICONTROL , How Else can i do it .... Thanks Darius Hofer
My customer uses an Wifi environment, where each devices is identified by a static address. We now need to bring in around 50 new devices an need to set an individual static ip therefore. I pushed a fusion profile to each device, but how can I individually set the static IP? I do not hope that a need to create 50 separate profiles for this? Thanks for any hint on that
I am having issues with the MobiControl Stage app when attempting to stage via bar-codes for Motorola/Symbol scanners. I have created a Fusion profile with all of the correct settings in the Mobicontrol stage app to connect to our AP however, I consistently get the error "Failed to configure Fusion Wireless" when finishing scanning bar-codes. Scanning the bar-codes does install the certificate I imported in the stage app but will not set the profile in Fusion before failing. I am able to set Fusion Global settings, Fusion password, Radio on, and Radio off fine through bar-codes and have confirmed these settings work. I also can create a profile in Fusion manually with identical settings to what I put in the Mobicontrol stage app and it works fine to connect. Does anyone have any experience with Fusion Wireless and Mobicontrol stage app? I can hardly find any documentation on the bar-code staging subject other than extremely basic SOTI overview documentation, so if anyone could shed some light on this I would greatly appreciate it. My model of scanner is Zebra\Symbol MC32N0 and MC3190 both with supported versions of Fusion according to the document I found on this forum. Here are a few more details: Mobicontrol VER: 13.0.0.33766 Mobicontrol Stage Ver 13.2.0 Build: 3247 Device Model: MC32N0 OS: Windows Embedded 7.0 build 2824 Device Model: MC3190 OS: Windows Embedded Handheld 6.5 Classic At this point I only need to be able to get bar-codes to set a wireless profile in Fusion and I'll be golden. Thanks again in advanced for any help provided.
Hello We are testing some Motorola phones (Moto E4 Plus, G5, C,)with Android for Work Owner device . We have several issues and I would appreciate your comments on them: 1. With lockdown applied, the status bar is not visible so users may not see the battery level, signal, etc. There is not option to show it. 2. When you send a message, it does not pop up the message but instead you have to open de Mobicontrol agent to see the message (the agent is shown in the lockdown) 3.In the devices (E4Plus, G5) that do not have physical buttoms (back, home, menu) it is not possible to exit lockdown. I also found that E4Plus allows remote control. The others , remote view. Thank you
Top-tier experts who are delivering outstanding content. Should have more than 7000 points.
Experts who are consistent with great content. Should have more than 1000 points
Highly experienced members with valuable inputs. Should have more than 700 points
Beginners taking the initiative. Should have more than 500 points
